Laser cutting machineIt is an important equipment for sheet metal processing and should be used correctlyLaser cutting machineIt is also an important prerequisite for improving its service life. Therefore, after purchasing a machine, we must master the standard operating procedures and methods to reduce the failure rate and improve its service life. Below, we will introduce the standard operating procedures for laser cutting machines:
& nbsp; Firstly, it is necessary to strictly follow the regulations and follow the principles of turning on and off the laser cutting machine equipment. Do not forcefully turn it off or on& nbsp;
& nbsp; Secondly, employees are not allowed to operate machines without training, and can only operate them on the machine after receiving complete training;
& nbsp; Thirdly, during the operation of the laser cutting machine, external personnel are not allowed to approach the control panel and console, and the core operation steps must be completed by professional personnel;
& nbsp; Fourth, adjust the optical path of the machine tool, adjust the cutting head in the follow-up method, and enforce accurate control procedures to ensure human-machine safety;
& nbsp; Fifth, every time the machine is turned on, it should return to the reference point, check and process the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure inside the bottle should not be lower than 1Mpa;
& nbsp; Sixth, check the external light path protection gas, cold circuit cabinet, cooling river circuit, air compressor, and refrigerated dryer of the laser cutting machine equipment once a week, and discharge the accumulated water from the filter.