四虎影视国产精品免费-欧美日韩欧美国产精品-精品久久只有精品做人人-青青草久久这里只有精品

The installation process of woodworking carving machine is as follows:

1. Confirm the configuration of the machine and computer, and ensure that the network connection is normal. At the same time, the requirements for the power supply should also be taken into account (such as whether 380V voltage is needed, etc.). In addition, attention should be paid to safe grounding to prevent the accumulation of static electricity and interference that may affect the operation of equipment and the life, property, and health of operators; Prepare tools, materials, and protective equipment and check their integrity. 2. Carefully read the accompanying manual before starting up, and strictly follow the requirements for equipment and software operation and management. For newly purchased machine tools, conduct a trial run under no-load conditions before starting work to ensure accuracy and avoid unnecessary losses or troubles. (This step requires caution to avoid starting the motor due to accidentally touching the switch) Before proceeding with the above content, it is necessary to ensure the safety of the environment and the stability of the equipment (for example, overloading is strictly prohibited). Otherwise, it may cause a series of problems and even lead to serious consequences (personal injury). The specific details need to be adjusted and improved according to the actual situation to ensure that everything is foolproof before continuing with the next step of work tasks and goals The first step is to shut down the program one by one according to the startup sequence to protect your beloved device and extend its lifespan! The above is the basic introduction of the entire installation process~I hope it is helpful to you~If you have any other questions, please feel free to ask at any time! We will wholeheartedly answer your questions~~

Attention: Remember not to forget to turn off the main air switch in the control cabinet and the small circuit breaker used to control the carving and milling head; During the transportation process, it should be handled with care to prevent collision and damage. As for the price, it usually fluctuates around 15000 to 4000 depending on individual needs. Also, it is recommended to consult the merchant for information obtained.

Based on the above, the approximate cost should be within this range. When choosing, you can also make a decision according to your own economic strength to understand the detailed situation. It would be more appropriate to directly ask the seller.