As we all know, precision CNC engraving machines generally required constant temperature environment, and only at a constant temperature, in order to ensure accuracy and processing of the engraving machine. Ordinary CNC engraving machine room is no specific requirement, but a lot of practice shows that when the temperature is too high when the NC system failure rate is greatly increased. Humid environment will reduce the reliability of CNC engraving machine, especially in the larger wet sour gas environments, printed circuit boards and connectors will rust, electric machine failure will increase, as follows:
1, ambient temperature should be between 0 ~ 35 ℃, avoid direct sunlight for CNC engraving machine, room should be equipped with good lighting equipment.
2, in order to increase the accuracy of carving engraving machine, reducing the thermal deformation of the machine, if the conditions can be CNC engraving machine is installed in a relatively closed, the installation of air-conditioning equipment plant.
3, the working environment relative humidity should be less than 75%. CNC engraving machine should be installed in a place away from splashes and prevent plant dripping.
4, away from excessive dust and corrosive gas environments.
1, ambient temperature should be between 0 ~ 35 ℃, avoid direct sunlight for CNC engraving machine, room should be equipped with good lighting equipment.
2, in order to increase the accuracy of carving engraving machine, reducing the thermal deformation of the machine, if the conditions can be CNC engraving machine is installed in a relatively closed, the installation of air-conditioning equipment plant.
3, the working environment relative humidity should be less than 75%. CNC engraving machine should be installed in a place away from splashes and prevent plant dripping.
4, away from excessive dust and corrosive gas environments.
本文網(wǎng)址：http://www.ahouya.com/news_view_464_171.html
